External Hard Drive To Usb
Connecting multiple hard drives together
USB ports are ubiquitous, and many external drives now come with both rectangular USB-A connectors and oval-shaped USB-C ones to enable adapter-free connections to PCs that have only one type. Sep 07, 2018 Most external hard drives are simply standard hard drives in a box with an additional circuit board that converts their native interface to USB. Depending on the drive, there might be an external power supply, or “ brick ”. So yes, open the case and you’ll likely find a standard hard drive you can then install directly into your PC.
There are many scenarios where you share one external hard drive among several computers, but not rare are the cases when you need to connect several hard drives together and use them on a single computer. More hard drives, for example, let you save data from being lost as you can back up the information on a second external or internal hard disk. Also, you could store more photos and music if you had additional storage devices connected to your PC.
Extending Hard Drive with Another External HD I would like to extend my main hard drive on my pc with an external hard drive. Currently the 2 hard drives are separate, but I wanted to make them the same location.
To install several hard drives on one machine, first, you should decide on the setup you want
Basically, you have two options:
- Connect several external hard drives to your laptop or desktop computer;
- Install additional internal hard disk on the desktop PC.
When it comes to an external hard drive, it's enough to use a USB or Firewire connection, external hard drives are very simple to install.
As for an internal hard disk, you can set it up as a separate storage device or connect it using the RAID technology. This method requires a motherboard with RAID support and allows using several hard drives together. Also, hard disks can be configured to mirror one another to duplicate and back up data.
Here’s how to install additional hard drive using the RAID utility:
- Before you start, make sure your computer has space for the new installations. Also, it’s recommended that you use identical hard drives that have the same amount of hard disk space and speed. To connect a new hard drive to the motherboard, use connector cables coming with the device.
- Once connected, start your computer. During start-up, there will be shown the keys that need to be pressed in order to launch the RAID program (e.g. “F4”).
- The utility will let you configure your hard drives into one of these hard-drive arrays:
RAID 0: With this configuration, you’ll be able to split data between several hard drives. This set up is referred to as “striping”. In this case, all hard drives can be accessed like it was one large hard drive.
RAID 1: With this configuration, one hard drive will mirror another one so that data can be copied and saved for backup purposes.
- After you’ve finished with the configurations, you should exit the RAID utility and reboot your computer.
- Once done, you can go to the directory and see the newly-installed hard-drive combination. All hard drives will appear as a single large internal hard drive. From that point forward you can copy data and install apps to that drive.
Many users complained that their external hard drives are connected but not showing on computer or File Explorer the Windows 10/8/7. Some reported that the USB or external hard drive is not showing up on My Computer or File Explorer but showing in Disk Management. Others said that external hard drive shows in device manager but not disk management. To fix these external hard drive issues, this troubleshooting post will be helpful for you.
Case 1: External hard drive shows up in disk management but not file explorer
You may experience that your USB or external drive has been connected to the computer, but it is not showing in File Explorer or My Computer, but shows in Disk Management instead. Under this situation, it will be regarded as an unknown disk and shows the capacity to be 2048 GB in the Disk Management. To fix the problem, please try following methods.
Tip: If your external hard drive shows in device manager but not disk management, you can directly move to the case 2.
1. Assign a Drive Letter to the USB/Hard Drive
Sometimes, the drive might not have been assigned a drive letter by Windows so that USB or external hard drive cannot show on File Explorer but in Disk Management. In this case, you can try to assign a drive letter to the USB or external hard drive in Disk Management.
STEP 1. Navigate to 'Control Panel'> 'System and Security'> 'Administrative Tools”.
STEP 2. Choose 'Computer Management”. Provide an administrative passcode, if asked.
STEP 3. In Disk Management, find out the unlabeled hard drive and right-click on it to choose 'Change drive letter and paths...'
STEP 4. Click 'Add'> 'OK' to pick out the available drive letter.
STEP 5. If the drive letter does not show on the drive, check if the drive is offline. If it is, right-click the disk number and select Online. And then, follow the instructions again.
NOTE:
If you can't finish the operation in Disk Management, you are able to run 'cmd' to change or assign the drive letter.
Open Command Prompt. (CMD) and type 'diskpart'.
At the DISKPART prompt, enter 'list volume”. ( mark down the number of the simple volume whose drive letter you want to assign)
At the DISKPART prompt, enter 'select volume n[volume's number]' (Select the volume whose drive letter you want to assign)
At the DISKPART prompt, enter 'assign letter=N' (N stands for the drive letter you want to assign)
2. Make sure that the hard drive is enabled and online
Make sure the hard drive is enabled
If the drive has been disabled, the disk will be invisible in File Explorer. When the disk is disabled, follow the steps below to Enable it:
STEP 1. Press 'Windows'+ 'R' on the keyboard to activate run box.
STEP 2. Type 'devmgmt.msc' on the run box to open 'Device Manager”.
STEP 3. If a drive is disabled, the disk drive will be marked with a down arrow. Locate the hard drive you want to enable.
STEP 4. Right-click on it and choose 'Properties'> 'View'tab.
STEP 5. Click on 'Enable Device' button > 'OK”.
STEP 6. After that, check if the down arrow is still there.
Make sure that the drive is online
Sometimes, an external hard drive connected but not showing because the drive is offline. To be detected by Windows, you can follow steps below to check the current status of the disk.
Go to 'Control Panel'> 'System and Security'> 'Administrative Tools'.
Choose 'Computer Management', and locate your disk in 'Disk Management'.
Right-click on it and select 'Online'.
3. Update drivers for USB or external hard drive
When your USB/external drive does not show on file explorer on Windows 10/8/7, you can try to update its driver in Device Manager. As we know, an update is created to fix some glitches for the previous version so as to make USB or external drive showing on My computer again.
STEP 1. Press 'Windows'key + 'R'and enter 'devmgmt.msc' on the run box.
STEP 2. Open 'Device Manager'> Click the 'Scan for hardware changes' icon on the menu.
STEP 3. Right-click on the inaccessible USB/external hard drive and choose 'Update Driver Software....'.
STEP 4. After the update is finished, restart your PC and check if the device is accessible.
External Hard Drive To Usb Adapter
4. Recover data from hard drive that is not showing
When external hard drive issue occurs, an external hard drive is not showing files though they still exist. If any important data is in the USB/external hard drive when external hard drive shows up in Disk Management but not File Explorer, you can employ data recovery to retrieve your data before formatting it. Here we highly recommend you FonePaw Data Recovery which is capable of recovering data from USB/ external hard drive, supporting Window 10/8/7. To recover data from hard drive, you just need few simple steps.
Download
STEP 1. Run FonePaw Data Recovery, and then, select the file types you need.
STEP 2. Next, click on 'Scan' button after selecting your USB/external drive.
STEP 3. Select out the files you want to recover.
STEP 4. Finally, click on 'Recover' button to finish data recovery.
STEP 5. After that, you can keep on formatting your inaccessible USB/external hard drive.
External Hard Drive To Usb Adapter
Case 2: External hard drive shows up in Device Manager but not Disk Management or File Explorer
Unlike case 1, USB or external hard drive sometimes is invisible in File Explorer or Disk Management, but it can be detected in Device Manager, for example, an external HDD won't show up in explorer, but it shows in Device Manager. To fix the issue, several methods can be listed below.
1. Make sure the USB or external hard drive is available. If it is not showing up in Disk Management or File Explorer, you can try to plug it into other USB port of your computer. What's more, you can connect your external drive to other computers to check if it works.
External Hard Drive To Usb Hub
2. Partition and format the external hard drive.
Go to 'Computer Management”. > Right-click on black bar of the invisible drive to choose 'New Partition...'> Follow the instruction to finish the Partition.
Right-click on the drive and select 'Format”.
3. Disable and re-enable the USB controller.
Navigate to 'Device Manager”. > Find 'Unknown USB Device' and right-click on it. > Choose 'Uninstall”.
After restarting your PC, enable the USB controller again.
Now, your issue - external hard drive not showing Windows 10/8/7 has been resolved. To manage the data on USB/external hard drive, read here: