1. Xbox 360 Emulator Update Download
2. Xbox One Emulator Download For Pc
3. Xbox Emulator For Linux
4. Xbox 360 Emulator Download Games
5. Xbox 360 Emulator For Linux

• Xenia is a free and open-source Xbox 360 emulator. The main challenges of installing linux on xbox 360 seem to be: 1.The cpu of xbox 360 is of powerpc architecture and is not supported by many newer linux releases. 2.Linux kernel code doesn't come with support for some xbox 360 specific hardware.
• Xenia is a free and open-source Xbox 360 emulator. The main challenges of installing linux on xbox 360 seem to be: 1.The cpu of xbox 360 is of powerpc architecture and is not supported by many newer linux releases. 2.Linux kernel code doesn't come with support for some xbox 360 specific hardware.

This is a brief guide to installing and configuring the Xbox 360 emulator, Xenia. This emulator is capable of running quite a few titles, however not all gam.

You’re looking for the best Xbox 360 emulator, but you cannot decide which one is the best?

Well, today, we have created a comprehensive post on the best Xbox 360 emulator that you can use to play Xbox 360 games on your desktop. Read this post with the utmost attention, and you will know some of the best Xbox emulators that you can use in 2020.

List of Xbox 360 Emulators.

Here is the list of the best Xbox 360 emulators:

1. Xenia Emulator.
2. VR box 360 PC emulator.
3. DXBX Emulator.
4. CXBX Emulator.
5. XQEMU Emulator.

Xenia

You know this one was coming. Xenia is the most widely used Xbox 360 emulator because it imitates the environment of Xbox 360. There have been very few or no instances where we have noticed any bugs or performance issues.

Although Xenia is only available for Windows, there are hints given by the developers that indicate that it might launch very soon for Linux operating system. Xenia requires a set of system requirements to deliver maximum performance in terms of speed and given. You will require the Windows operating system of version 8/10. Along with that, you will require a dedicated GPU and the latest processor. Basically, you will require a mid-range PC if you want Xenia to work, and that’s quite reasonable because of the performance that Xenia will deliver.

All you have to do is download Xenia by clicking here. After you have downloaded the zip file in your system, extract it to your desired location, and start the installation process. Once the installation is done, launch and enjoy your Xbox 360 game on PC. Xenia’s merit is that it is an open-source program, so you can download it for free without paying a dime.

VR Xbox 360 PC emulator

Next, we have VR Xbox 360 PC emulator; this emulator is the second most widely used emulator because of its low-end system compatibility. Many users could use this and play their favorite Xbox 360 titles on PC because VR Xbox 360 PC emulator can work on low-end PC. You will need an operating system of Windows XP and above, a dual-core processor, a GPU unit supporting DX9, and a memory of a minimum of 6 GB.

Overall, VR Xbox 360 PC emulator is a highly efficient emulator that will give you a high FPS gaming experience and improved memory management, and last but not least, a realistic Xbox 360 gaming performance. You can download VR Xbox 360 PC emulator for free by clicking here.

CXBX Emulator

CXBX Emulator is an emulator that was initially launched to emulate Xbox one games on desktop. Later, it was used for playing Xbox 360 games even though there are questions regarding its use for gaming on Xbox 360 but still is programmed to neutralize any bugs or lags.

CXBX Emulator comes with a feature that easily converts an Xbox game file to an executable file so that you can play your Xbox 360 game directly on PC. This saves your time from creating a virtual machine to load your game.

Lastly, there is only one limitation to CXBX Emulator, and that is you can only load and play 6 games of Xbox 360/ One. You can download CXBX Emulator by clicking here.

DXBX Emulator

Last on the list, and we have DXBX Emulator. This emulator is highly demanded and is a budding emulator because of the inheritance properties that it offers. It completely replicates the features of Xbox 360.

DXBX Emulator Is easy to use and has a user-friendly interface. You do not require a high-end system to use this emulator. Any operating system from Windows 7 and above will work. But there is a catch here you will need a 32 bit Windows version to use this; any 64-bit version used will not support DXBX Emulator.

Xbox 360 Emulator Update Download

Same as CXBX Emulator, this emulator also has a feature to convert an Xbox game file to an executable file To make your installation process much easier. As DXBX Emulator is an open-source program, you can download it for free by clicking here.

Conclusion

Well, this was our short post on the best Xbox 360 emulators, And we hope that you like it. If you have any inquiries or proposals regarding this post, then put it in the comments section below; let us know which emulator you download for your PC.

Xbox 360 Controller
Quite a few Linux systems are used for gaming. Gaming systems are very popular and so are the controllers to use for them.
For this article, I used my Symple PC with Linux Mint 17.1 as well as using Linux Mint from a Live CD on another system. I managed to use an XBOX 360 USB Controller for various games.
To start, you need to install the joystick tester. To do this, you can perform the following command:
sudo apt-get install jstest-gtk
Once installation has completed, attach the XBOX 360 Controller to a USB connector. Open the “jstest-gtk” and you should see a window similar to Figure 1.

While “jstest-gtk” is opened and the controller is connected, select the “Properties” button. The window should appear as it does in Figure 2.

If you play with the XBOX 360 Controller, you will see that some of the buttons are messed up. To fix this, make the necessary changes by selecting “Mapping” and change the window to look like Figure 3.

Now, when you use the analog joysticks and the directional pad, the Axes should move properly.
Let’s look at the XBOX 360 Controller and see what the different control points exist. A generic XBOX 360 Controller is shown in Figure 4.

The various controls are as follows:
· 1 – Right Analog Joystick [ABS_RX, ABS_RY]
· 2 – Directional Pad [ABS_HAT0X, ABS_HAT0Y]
· 3 – Left Analog Joystick [ABS_X, ABS_Y]
· 4 – Select/Back Button [BTN_SELECT]
· 5 – Left Button (LB) [BTN_TL]
· 6 – Left Trigger (LT) Button [ABS_Z]
· 7 – Guide Button [BTN_MODE]
· 8 – Start Button [BTN_START]
· 9 – Right Trigger (RT) Button [ABS_RZ]
· 10 – Right Button (RB) [BTN_TR]
· Y – Y Button [BTN_Y]
· B – B Button [BTN_B]

Xbox One Emulator Download For Pc

· X – X Button [BTN_X]

Xbox Emulator For Linux

· A – A Button [BTN_A]
· Press Left Analog Joystick [BTN_THUMBL]
· Press Right Analog Joystick [BTN_THUMBR]
NOTE: The values in the brackets are those of the Axes or Button label. Be aware that that the last two entries are pressing the Left or Right Analog Joysticks.
Let’s have a look and see that the controller is truly acting as a joystick. To do this, install a game called “Burger Space” by performing the following command:
sudo apt-get install burgerspace
Once installed, start “burgerspace” and press F11 to maximize it to Full Screen. Toward the bottom of the screen you see the list of keys which control the game, but no mention of using a joystick. Even though it is not listed, the controls are:
· Start – Start Button
· Pause – Select/Back Button (Start Button to Resume)
· Up/Down/Left/Right – Left Analog Joystick
· Pepper – B Button
· Other buttons such as L, S, F11, ESC are not mapped to the controller and the keyboard is required to operate these functions
You may be thinking that the Analog Joysticks and Directional Pad can be remapped in “jstest-gtk”. They can, but some controls are hardcoded by the labels as listed above in the brackets. So, no matter where the control is mapped, it still has the same label.
For another game, let’s look at a console emulator such as the Multiple Arcade Machine Emulator (MAME). To install MAME, perform the following:
· sudo apt-get install mame
· mame (start it then close it to the ~/.mame folder)
· cd ~/.mame && mame –cc (changes to the ~/.mame folder and creates the configuration file)
· gedit ~/.mame/mame.ini (edits the mame initialization file)
· edit the “rompath” to include “$HOME/.mame/roms”
· create the following folders in “~/.mame”
· go to http://mamedev.org/roms/starfire/ and download the two files: startfire.zip and starfir2.zip saving them to ~/.mame/roms
At this point, you can start “mame” and begin the “starfire” game. The game is completely controlled by the keyboard at this point. The main controls are:
· Up/Down/Left/Right – use the arrow keys
· Player One Button One – Left Control
· Insert a Coin – 5

Xbox 360 Emulator Download Games

· Start Player One – 1
To configure the joystick, select “Configure General Inputs” and then “Player 1 Controls”. Here, for instance, you can see that the “P1 Up” is set to “UP or Joy 1 Up”. Looking at the labels above, there are not labels called “Joy 1 Up”. The incorrect labels mean that the joystick controls will not be recognized. For the controls: P1 Up, P1 Down, P1 Left, P1 Right, P1 Button 1, P1 Start and P1 Select will need to be changed.
To change the control for “P1 Up”, highlight it and press ENTER. Now, press the UP arrow key on the keyboard. The mapping should now be simply “UP”. Press ENTER again and then press the analog joystick you prefer to the up position. For example, if I used the Directional Pad Up, the mapping would show: “
UP or Joy 1 hat Up”. Make sure the “or” is there or it will not work. You need to keep the keyboard and joystick controls together in case the joystick is not available. In this case, the keyboard is still usable. Perform the mapping for all the other keys. Use A, B, X or Y for P1 Button 1. Use the Start Button for the “P1 Start” and the Select Button for the “P1 Select”.

Xbox 360 Emulator For Linux

Now that the main buttons are set, select a game to start and press ENTER. Once the game Title Screen starts, press TAB. This brings up another control setting window. Select “Input (this Game)”. Make the same setting changes for the keys using 1, 5, LEFT, RIGHT, UP and DOWN. Then “Return to the Previous Menu” and “Return to Game”. Now, the XBOX 360 Controller should work for the game. You can change the controls as needed for each game.